Variable Displacement Axial Piston Pumps

VPA10VSO Series 31

Variable Displacement Axial Piston Pumps

Description

Anfield VPA10V(S) series variable displacement axial piston pumps are designed for open loop circuits and can be used in both mobile and industrial applications. The output flow is proportional to the drive speed and the displacement.

The VPA10V(S) series piston pumps are available in six displacements, ranging from 1.10 in³/rev (18 cm³/rev) to 8.54 in³/rev (140 cm³/rev). They offer speeds up to 3,300 rpm, a rated working pressure of 4000 psi (280 bar), single pump or through drive pumps allowing for multi-circuit systems. Offered in SAE or Metric mounting with side or rear porting.

Available in a variety of controls with short control response times. These variable piston pumps offer the benefit of providing power only when needed.

Features

  • Variable pump with axial piston rotary group in swashplate design
  • Offered in sizes 18, 28, 45, 71, 100, 140
  • Designed for open loop circuits
  • Output flow is proportional to the drive speed and displacement and can be infinitely varied by adjusting the swashplate angle.
  • Versatile controller range with short control times
  • Excellent suction performance
  • Low noise nine-piston design
  • Long service life with favorable power/weight ratio
  • End or side inlet and outlet ports for design flexibility
  • Multiple case drain ports for various mounting orientations
  • Through drive option for multi-circuit systems, allows adding gear and axial piston pumps up to the same size (100% through drive)
  • Buna-N or Viton seal options available
Application
  • The Anfield VPA10VSO series pump is designed to be flexible, compact and cost-effective for mobile and industrial use.
  • The load-sensing circuit of the VPA10VSO pumps help reduce fuel consumption and operate with excellent efficiency.

Additional Information

If you have other questions please email us at info@anfieldind.com

or call

US: 404-530-3804

Canada: 905-303-8700

Similar Products

ADP102

Direct Mount Dump Pump

  • Single shaft direct mount
  • Manual or air shift
  • 2 displacements: 85 & 105 cc/rev
  • Max rated pressure: 2500 psi

ADP101

Remote Mount Dump Pump

  • Dual shaft remote mount
  • Manual shift or air shift
  • 2 displacements: 85 & 105 cc/rev
  • Max rated pressure: 2500 psi

AT SERIES

Replacement Parts

  • Replacement parts available:
  • Cartridge Kits
  • Cam Rings
  • Shafts & Bearings
  • Seals Kits
  • Housings

.

AT6DRM

Single Vane Pump with Through Drive

  • Frame Type: D
  • Mount: SAE C – 2 Bolt
  • Max Pressure: 3000 psi
  • Replacements for Parker®/Denison® T6DR

AT6EDCS

Triple Vane Pump

  • Frame Type: D +C + C
  • Mount: SAE C – 2 Bolt
  • Max Pressure: 3000
  • Replacements for Parker®/Denison® T6EDCS

This Site Uses Cookies

We are using cookies on our site. These cookies enhance your experience, and improve the quality of our site.