- The APQ-20 is a high pressure hydraulic gear pump with cast iron end caps, aluminum housing and a 14 tooth gear set for quiet operation.
- Standard mounting flange is SAE A-2 bolt, 3.25” pilot.
- Standard ports are SAE-12 inlet and SAE-10 outlet.
- Optional rear ports available.
- Standard drive shaft is 5/8” straight shaft with 5/32” key.
- Optional shafts include an SAE 9 tooth spline and a 3/4” straight shaft with a 3/16” key.
- Mounting flange: SAE A-2 bolt
- Displacement range (CIR): 0.275 to 1.52
- Maximum operating pressure (PSIG): 3650
- Shaft options: Parallel shaft with key, splined shaft and tapered shaft (upon request)