- AP-20A is high pressure gear pump with cast iron end caps and an aluminum housing.
- Standard mounting flange is SAE A-2 bolt.
- Standard ports are SAE-16 inlet and SAE-12 outlet.
- Standard drive shaft is 5/8” straight shaft with 5/32 key.
- Available options include 3/4” straight shaft with 3/16” key and SAE 9 tooth spline.
- Mounting flange: SAE A-2 bolt
- Displacement range (CIR): 1.52 to 2.44
- Maximum operating pressure (PSIG): 3650
- Shafts options: Shaft options: Parallel shaft (keyed), spline shaft and tapered shaft(upon request)